Skip to content
Cashier Shields
Description
US Made - Fast Shipping
Enhance customer and employee safety
- Use any clear plastic from 0.060" to 3/16" thick
- Full height or use the built in stop at 12" up for product pass through
- No drilling required w/non-slip base options
Base Options
- Steel Clamp-On Base - Use included S knob to secure to countertops from 3/4" to 1-1/2" Thick
- Racetrack base - Flat steel base 3" wide x 12" deep with non-skid, rounded front and back
- 6-3/4" Round steel base w/double sided tape
- 4" Square drill down base - Does not include mounting screws
Upright's can be either Anodized, Powder Coated, or Painted Silver
Steel bases for added durability
Set screws lock plastic in place
Add center uprights to extend partitions (CBSHR-C)
Clear Plastic Divider Material NOT included
Our Cashier Shields can be used as countertop sneeze guards, cashier barriers to hold acrylic polycarbonate or PETG. These highlight configurable countertop barriers can be used as temporary acrylic barriers / non-marring sneeze guards, or as permanently installed desk safety partitions. Our plastic divider system with sneeze guard uprights ideal to hold acrylic dividers is Made in the USA and highly customizable in quantity, including custom height sneeze guards with pass through openings.
More Information
Templates/Instructions
Product Specifications
Artwork Guideline
Accepted File Formats
• Adobe Illustrator CC (or earlier) - .ai or .eps
• Adobe Photoshop CC (or earlier) - .psd or .tif
1. Photoshop files should be 100-120dpi at full output size.
2. Do not embed color profiles.
3. Provide a layered file.
4. When using stock photography images, be sure to purchase the highest resolution version that your budget will allow.
5. We use CMYK printers to create these graphics. 100% reproduction of defined colors is not possible. Differences between colors in the printed and original file can occur at many different stages. Variations in color or shading are often a result of viewing on un-calibrated equipment (monitors, printers, etc). Colors will often appear different when viewed on two different monitors or output devices. Without accurate color information, we have no way of ensuring that expected colors will be achieved.
6. Indicate Pantone Values for all critical colors.
7. An e-proof is provided within 48 hours of artwork approval.
Process
1. Artwork should be submitted the same day the order has been placed to avoid delays.
2. After receiving your file, it will be reviewed within 24 hours for printing requirements. If the file does not meet all necessary requirements, you will be contacted by a representative.
3. If corrections are required, you may make these changes yourself and resubmit the file or choose to have JW Displays make the corrections (if we are able to do so).
4. After the file has been approved we will send a proof for your approval. We will proceed with production/printing only after the proof is approved with a hand signature.
5. Production lead time starts after proof has been approved by the customer.
6. Shipping time starts after production time.
Artwork
1. Please indicate any special positioning requirements.
2. If using Illustrator convert all fonts to outlines.
3. If using Photoshop rasterize all fonts.
4. If matching Pantone colors please provide a layered file. This allows us to make minor color corrections if necessary.
5. Only send files relevant for output.
6. Art will not be approved unless submitted in our provided template(s). All templates are found under the guidelines page for each product (If one is missing please let us know).
7. File color mode must be CMYK.
8. If using Illustrator embed all images.
9. Hard proofs available for $50 (will add time to the in hand date). If you make changes to your file after the proof is sent, there is a $50 charge (per proof) thereafter.
10. Due to variations in output and viewing devices, we are unable to accept complaints about color variations unless all color matching guidelines have been followed.
Submission
1. Please send all files and folders using: https://jwdisplays.wetransfer.com.
2. Files must be named using your order number (ex: 16001001). You should have received your order number when your order was placed.
3. JW Displays will not address and is not responsible for delays due to improperly named files.
Unable to upload the Artwork?
If you are unable to upload your artwork, feel free to send artwork files via USB drive. Please write your order number on the drive and shipping envelope (JW Displays will not be responsible for returning any USB drives, unless you supply us with a self addressed envelope).
Send to: 822 A1A N., Suite 310, Ponte Vedra Beach, FL 32082.